Tuesday, January 28, 2014

Traveller - Sharushid Type 42 Fire Direction Centre


Sharushid Type 42b ACV/FDC

These second-line vehicles are converted from obsolescent Imperial TL 10 Type 41 APCs.

Miniature by Laserburn/15mm UK - bits from GZG and Grendel


Nicknamed “The Pig” (V. ishalap) by both Confederation and Vilani troops alike, the design dates from the Pacification Wars, and the Type 41 lags a tech level behind its Type 52 replacement.

Tens of thousands of Type 41’s have been manufactured. The Vilani deplore waste, and as a result many of the mothballed T-41’s were sent to the Frontier Legions.  Others were pressed into service as support vehicles.

In conformance with standard Imperial doctrine, the Type 41 was designed without weaponry or firing ports. Frontier Legion motor pools often modify the design by adding firing ports and support weapon mounts. It is known that some Gisadia line artillery batteries on extended active service will add anti-personnel mines to the exterior.  These mines are detonated remotely as a last-ditch defense measure.

The T-42c is the hover version, and coordinates the artillery battery fire missions. In Striker II terms, it acts as a Staff Satellite Uplink Stand for artillery units.

This vehicle was something of a lark for me, in that I can only foresee one or two scenarios where this miniature will appear, but I had the extra miniature and wanted to see it painted. It could also be used as a communications vehicle or as an objective.

The model is an old Laserburn Hover APC, soon to be available in resin from 15mm UK, with GZG and Grendel bits added. I'm only partially finished with painting it, but I wanted to get at least one post up for January...Ω





Friday, December 27, 2013

Traveller - 15mm Ziru Sirka Point Defense Sleds

Sharushid Type 53 Fire Support/Point Defense ACV IFV

The Type 53 uses the standard Imperial Type 52 hover-sled chassis, with the addition of a larger turret housing a 44mm mass-driver and coaxial VRF gauss gun. Most of the infantry stations have been removed to accommodate the sensors and fire control computer.  The MD gun is designed to destroy light tanks and APCs/AIFVs, though it can also be used to shoot down indirect-fire munitions.  Supplementing the main gun, and linked to the main fire control is the coaxial VRF gauss gun. The VRF gauss gun is tasked as the primary Point Defense and anti-infantry weapon.
 

The majority of armored vehicles in Ziru Sirka service represent some sort of trade-off, and the Type 53 is no exception. Designed to provide medium fire support to infantry, the Type 53 is also tasked with providing point defense against enemy missiles, rockets and artillery shells, leading one Terran military expert to describe the Type 53 as a cross between an alligator and an ostrich.
 
The 44mm MD gun being insufficient to penetrate the front armor of most ConFed tanks, the T-53 mounts four 84mm anti-tank missiles in the anti-armor role. Missile reloads are stored in the vehicle: a veteran crew can replace each spent missile in about a minute per missile.
Critics of the Type 53 often cite the weak armor (easily penetrated by the latest RAM grenades) relative slow speed of the missiles, and dual role.  By combining fire support and point defense into one vehicle, the Imperium has essentially created a high-value APC that looks like a tank, hunts like a tank and draws fire like a tank, while having none of the advantages of a tank.   

The coaxial mounting of the main gun/VFR gauss gun forces the Type 53 crew to concentrate on one task at a time (either Fire Support or Point Defense), which proved limiting during the Interstellar Wars.

Variations

During the later period of the Interstellar Wars an additional VRF gun was mounted atop the turret* displacing the EMS sensor dome. This allowed the upgraded Type 53 (designated Type 53A1) to engage multiple targets without degrading performance....Ω



*the Frontier Legion is credited with salvaging a Type 52 and creating the first Type 53A1 prototype. Imperial Quartermasters deny this, of course, as the proper patents were never submitted.


Sunday, November 10, 2013

15mm Ziru Sirka Artillery - revisited


For years, I've had a Stan Johansen Star Armor Grav Gun Platform gathering dust on the shelf.  As with some of my Star Armor tank castings, someone gave it to me. This came in handy, as there was something about the Star Armor ACV tank hulls that, for the Imperial Artillery, simply wasn't working for me. The hulls I had been given were designed for hover tanks, and as the Vilani say, tradition must be honoured. I wanted something that looked like big honking gun platforms.

Back to the project at hand. After dremeling the grav bits off,  the Johansen gun platform fits the separately-purchasable hover skirt nicely, and reminded me in a way of the M270. True, the gun platform is exposed, inviting a troubling counter-battery strike - however, the Vilani Imperium enjoys a tech advantage over their opponents, and invariably out-ranges Op-force batteries by a comfortable margin. Perhaps the Vilani see a protected gun platform as a sign of weakness.

Gun Section Reports: READY...


I think the result is an improvement.

Specs for this brute were generated using Fire, Fusion and Steel - using electro-thermic chemical propellant, this gun hurls a 288mm (450kg) warhead 57ks or 35 miles. 

Not bad for TL 11...Ω




Thursday, October 31, 2013

Traveller 15mm Ziru Sirka Artillery

Modern artillery has such a long range, in 15mm it can often be represented off board. In the Traveller universe, this is especially true for futuristic artillery, so I don't often deploy grav or GEV artillery vehicles in my table top war games.

This changed a few weeks ago. In helping an old friend clean out his basement hobby area, I was rewarded with some nice bits of old Stan Johansen Star Armor - some GEV hulls and artillery pieces.  After transferring them to *my* basement hobby table, I began to think of scenarios involving artillery vehicles in the First Imperium.

Show with 15mm GZG New Anglian Federation

One scenario which keeps recommending itself is a Delta Sierra/Deep Serious situation where a battery is being threatened by an over-run; probably the worst thing for a gunner is to lose his gun.

Missile Battery

This idea was combined with another I had written down to form a scenario where the Imperial GEV artillery was "ambushed", while en-route to their next firing position, by Terran Confederation Recon troops.  The Terrans are trying to destroy the Imperial vehicles, whilst the Imperials are trying to get into firing position. The guns become victory objectives for both sides, whilst the massive firepower becomes tertiary to the scenario.

Of course, once I had hit on the scenario, I had to order more vehicles from Stan Johansen.  My friend had given me enough miniatures to peak my interest, but not enough to carry out this new escapade.



Thanks guy...Ω


Monday, September 16, 2013

FLASH! AAAAHaaaaah!

This has been a long-term project, which stalled for a two-year period.

With music by Queen, Max Von Sydow dressed as Evil Spock, Brian Blessed in valkyrie armour, Melody Anderson in a cabaret slave girl costume and Ornella Muti in spandex, what's not to love about Dino Di Laurentis' 1980 film Flash Gordon: Saviour of the Universe?

Campy and cool, rowdy and raucous, resplendent with gold lamé, lycra, blasters and bondo, this film remains one of my favourites and when I was first introduced to Rattrap Productions Fantastic Worlds rules set, I resolved to put a few forces of Hawkmen, Treemen, Earthlings and Ming's  supporters together for some tongue-in-cheek gaming.

Below are the first installment - Ming's Security - available from Dirk Garrison miniatures.  They are painted in the mangenta  pink as seen in the film.  The gold trim was easier to paint than I expected - the masonic-style symbol on their chests was considerably less so.

Ming's Security - Back to the Fuschia

Next time...Voltan's Hawkmen....aaaahAAAH!
...Ω


Wednesday, August 21, 2013

Rebel Minis Red Guard to Solomani Naval Assault Infantry

It's been a while since we've played Striker II, but the 15mm Red Guard from Rebel Minis have me dusting off the rules book and practising my Solomani Manifesto as they prepare to square off against my Imperial 99th Provisional Marines.


These were easy to paint with good detail and animation. I based mine for Striker II - I found that I can adapt based figs to StarGrunt II using Mark Clambo's StrikerGrunt rules hack.

They are in desperate need for some support troops, not to mention some C3 figures as well.

I went with a dark field grey as a nod to those other famous Confederates - the C.S.A. It doesn't hurt that it also resembles WW2-era Wehrmacht: I don't buy into the Solomani-are-Space-Nazis meme, but it does help to give them a bit of character.

The various light and dark greys were rather monotonous to paint, but I didn't want to mess about with a camouflage pattern.


 
Next is my DLD-era GAIFV (Grav Armoured Infantry Fighting Vehicle).  It looks to me like Dave at DLD was thinking of the Sd.Kfz. 251, also of Wehrmacht fame.

The original model had a sort of duck's bill arrangement under the prow - I tossed those in favour of a milliput fender.

The turret mounts a plasma gun and was purchased from Brigade Models about eight years ago.


 My Assault (Naval) Infantry template postulates that the Solomani don't use marines in the same way as the Imperium does. The ConFed have ship's troops (marines) for shipboard security, but for rapid deployment of heavy combat units, my ConFed uses Naval Infantry in the same manner as the Soviet Union used to do.


Naval Assault Infantry Platoon

Solomani Doctrine may not be as effective as Imperial, but then again, they did come off the worse in the Rim War...Ω






Monday, August 19, 2013

15mm Mine Processing Dome

 Mining is a common feature in Traveller, whether it be lanthanum for jump drives or bauxite for making aluminium. When one wants to create a Traveller war-game scenario involving mercenaries, the seizing of mining sites seems to be an obvious choice.

Below is my centre-piece for Mine #5 - a TL 8 ore precessing dome.  It's a simple conversion from an old Stonewyrks #8803 "Domed Building", which an old friend gave to me while moving house last November. This thing is cast in hydra-stone/gypsum and is quite hefty.


I actually now have two of these, having originally bought mine in the late '90s (at the same time my friend bought his) as a 28mm building. Admittedly, I didn't much care for the size-vs-scale, since at 28mm, it's a pretty small building.

And thus, it languished for nearly two decades.  Until I needed something in 15mm scale.

With 15mm GZG NAC Infantry

The building itself is mostly scale-neutral, except for the doorway, which betrays the 28mm roots.  A simple styrene cap with a GZG building fixture door in 15mm remedies this.

The other issue I have with "ultra-modern/modern-plus" gaming buildings is colour scheme. My initial impulse is to reach for the light grey aerosol can.  In this case, I decided to go with a "Company" look, and a combination of burgundy and bronze was the result. Walmart sells a "Hammered Bronze" DIY spray can which worked very well for the dome.

With 25/28mm door & Black Tree Doctor Who figures

Next step is to paint up some company housing for the miners, and then the real fun starts...Ω